Apple iPhone 11 Pro Max Face ID Repair Cable

£34.95 £29.12
In stock
In stock (13)
SKU
IPHONE11PROMAX-FACEIDCABLE


Main Warehouse Nutel Solutions Ltd

, Battlesbridge, Essex
SS11 7RH
13 units available
Buckle the dot flex cable on the i2C programmer to test
 Press the ‘Read’ button to read the data from the flex cable
When Data Read OK, take the corresponding model I2C cable and connect with the I2C programmer
Click the ‘Write’ button to write the data into the new flex cable
Apply some UV glue on the glass lens Then solidify under the UV lamp
 (The purpose of this step is to keep glass lens well aligned with metal frame for further better alignment)
Separate and take out the dot projector cable
Hold the dot projector cable on the holding fixture
Remove the MOSFET and short the related pins
Separate the dot projector board from the original cable
Clean the pads on the dot projector board 
Apply solder paste and reball the pads on the dot projector board
Align the dot projector board with the I2C dot projector board, heat with the hot air gun to solder the board and flex cable together
Connect the soldered dot projector cable with the I2C host machine to test the functions is OK or not
After testing OK, refer to the mark made before to align the dot projector cable with the glass lens
Apply special glue on the gap between the glass lens and dot projector cable, then hold with test fixture for solidification
 Buckle the Face ID module to test the Face ID functions
More Information
EAN 5060384812328
Dimensions 20mm x 20mm
Item Returns This item can be returned
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
© 2024 FoneJoy. All Rights Reserved. 1-2 The Maltings, Battlesbridge, Essex, SS11 7RH